Submersib pump for vertical centrifugal slurry pump, submerged in liquid, used for conveying corrosive, coarse particles, high concentration slurry.Without any shaft seal and shaft seal water, it can work normally under the condition of insufficient suction.The flow parts are made of wear-resistant metal.…
■Adopt large-channel anti-clogging impeller structure, the particle passed can be 50% of the pump diameter.
■Mechanical seal adopts the new-type hard quality and be able to bear the rotten carbonization tungsten material, featuring a durable and wearable. The pump could run more than 8000 hours without stop. There is high-accuracy anti-interference to test the lead in the sealed oil room to protect the pump.
■It can be collocated with the switchboard of full-automatic safe protection if needed to protect the pump when leak water, leak electricity, overload definitely, improve security and dependability of the products.
■The motor may adopt water jacket outside cycle cooling system, ensure the pump work without water(dry style) safely. There are two kinds of different installation ways, fixed style auto coupling installing system, removing style free installing system.
The structure diagram is as follows：
■The flow passage parts shall be made of Cr26 anti-wear material, or cr30, cd4mcu anti-wear and corrosion material and other general anti-wear materials according to the transmission medium.
■Pump body, pump cover, bracket and other supporting parts: gray cast iron
■They are designed for handing abrasive or corrosive alurry in the metallurgical,mining,coal,power,building material and other industral departments etc.